Draw curves

Choose Draw curve from the left rail. In Curves options, choose a type and follow the construction prompt. Curve dimensions use the unit selected in Settings; angle settings are in degrees.

Type	Construction	Useful settings
Parabola	Click start, end, then a point on the curve.	Depth changes the pointer-controlled curve depth; Flip direction reverses it.
Ellipse	Click the center, a point on the major axis, and a point defining the minor axis.	Major and minor radii, rotation, and optional start/end angles for a trimmed ellipse.
Hyperbola	Click the center, an axis point, and a point on the curve.	Major/minor radii, branch, rotation, and trim extent.
Bézier	Choose quadratic (3 control points) or cubic (4), then place the endpoints and handles as prompted.	Degree: quadratic or cubic.
B-spline	Choose degree 2 or 3 and place the control points; press Enter to finish.	Degree.

The options panel shows the point prompt and reports when the current draft is complete. Use Escape to cancel it. For a face, the resulting curves must form a supported closed boundary; then use Create a face. For snapping and point placement, see Snapping and curves and Place points while sketching.